PALLETIZERS

NEK HANDLING 20

BOTTLES

Machine suitable to the palletizing of bottles on pallet. 

Double-guide support framework of painted stainless steel bearing the palletizing head with gripping bells or inflatable bars. 

Automatic pad inserter positioning the pads between the layers to be palletized.

 Bottles fed to the gripping head through a continuous unscrambler or pushing device depending on the speeds. 

Various models available for capacities up to 16.000 bottles/hour.

MINIPAL 20-C

CARTONS / CASES

Machine suitable to palletize layers of cases or cages, with or without crossed layers, by working from the bottom.

Mobile palletization head managed in horizontal and vertical moves by inverter to have accurate and soft starts/stops. The lifting and descending movements of the keeping head are solidly and precisely guided by lateral devices with roll sliding on hardned iron guiding rails.

Touch screen interface shows anomalies, change-control, production data and gives to add and create new palletization programs.

 Model suitable for lines with capacities up to 500 cartons/minute.

JOLLYPAL 20-12

CARTONS / CASES

Machine suitable for the palletizing of cartons or cases in layers at crossed planes and not with processing from the bottom.

Solid and sturdy portal framework in painted steel. Horizontal and vertical movements of the machine controlled by inverter for precise and soft starts and stops. Pneumo-mechanical contrast system positioned on the transport of the cartons arriving in a position need being turned.  Motorized transport on board of the machine where the configuration of the layers in made row by row with the possibility of creating, if necessary, spaces through the step by step system.

The descent and lifting movements of the gripping head are guided and solidly stabilized by devices on the side of the chariot equipped with rollers sliding on wide-section guides of hardened steel, fixed inside the columns building the main framework of the machine. The palletizing head is equipped with adjustable compactors for the squaring of every single layer before and during the laying-down. Touch Screen for the creation and modification of palletizing program directly from the machine. 

Model suitable for lines with capacities up to 1.200 cartons/hour.

ACCUPAL 20-16

CARTONS / CASES

Machine suitable for the palletizing of cartons or cases in layers at crossed planes and not with processing from the bottom.

Solid and sturdy portal framework in painted steel. Double-column framework of painted carbon steel bearing the palletizing head. 

The horizontal and vertical movements of the head are operated by motors controlled through inverters with progressive variable speed. A contrast pneumo-mechanic PIVOT operated by a control PLC is installed on the motorized roller conveyor at the inlet to orient the cartons according to the palletizing configuration. 
Motorized transport on board of the machine where the configuration of the layers is performed row by row with the possibility of creating spaces, if necessary, with a step-by-step system. A pusher mounted on a double-column framework and operated through an inverter with progressive variable speed, transfers the pre-formed rows on an intermediate plane and only after completing the formation transfers it on the palletizing head.  The palletizing head is of central-opening type with sliding of the two half-parts in opposite directions: this technology allows a perfect centring of the products thanks to the balances distribution of the weight on the whole surface of the pallet. The palletizing head is equipped with three manually adjusted pneumatic compactors and a mechanical motorized one with automatic positioning allowing the squaring of every single layer before and during the laying-down. 

Model suitable for lines with capacities up to 1.600 cartons/hour.

ACCUPAL 20-20

CARTONS / CASES

Machine suitable for the palletizing of cartons or cases in layers at crossed planes and not with processing from the bottom.

Solid and sturdy portal framework in painted steel. Double-column framework of painted carbon steel bearing the palletizing head. 

The horizontal and vertical movements of the head are operated by motors controlled through inverters with progressive variable speed. A contrast pneumo-mechanic PIVOT operated by a control PLC is installed on the motorized roller conveyor at the inlet to orient the cartons according to the palletizing configuration. 
Motorized transport on board of the machine where the configuration of the layers is performed row by row with the possibility of creating spaces, if necessary, with a step-by-step system. A pusher mounted on a double-column framework and operated through a progressive variable speed inverter, transfers the pre-formed rows on an intermediate plane and only after completing the formation transfers it on the palletizing head. 
The palletizing head is of central-opening type with sliding of the two half-parts in opposite directions: this technology allows a perfect centring of the products thanks to the balances distribution of the weight on the whole surface of the pallet. The palletizing head is equipped with three manually adjusted pneumatic compactors and a mechanical motorized one with automatic positioning allowing the squaringof every single layer before and during the laying-down. 

Model suitable for lines with capacities up to 2.000 cartons/hour.

ACCUPAL 20-24

CARTONS / CASES

Machine suitable for the palletizing of cartons or cases in layers.

Solid and sturdy portal framework in painted steel. 
Double-column framework of painted carbon steel bearing the palletizing head. 
Horizontal and vertical movements of the palletizing head are controlled by a progressive variable speed inverter. A contrast pneumo-mechanic PIVOT operated by a control PLC is installed on the motorized roller conveyor at the inlet to orient the cartons according to the palletizing configuration. 
Motorized transport on board of the machine where the configuration of the layers is performed row by row with the possibility of creating spaces, if necessary, with a step-by-step system. A pusher mounted on a double-column framework and operated through a progressive variable speed inverter, transfers the pre-formed rows on an intermediate plane and only after completing the formation transfers it on the palletizing head. 
The palletizing head is of central-opening type with sliding of the two half-parts in opposite directions: this technology allows a perfect centring of the products thanks to the balances distribution of the weight on the whole surface of the pallet. 
The palletizing head is equipped with four compactors for the squaring of every single layer before and during the laying-down.

Model suitable for lines with capacities up to 2.400 cartons/hour

ACCUPAL 20-35

CARTONS / CASES

Machine suitable for the palletizing of cartons or cases in layers.

Solid and sturdy portal framework in painted steel. Double-column framework of painted carbon steel bearing the palletizing head. 
Horizontal and vertical movements of the machine controlled by inverters with progressive and variable speed. Machine with double-entrance of the cartons. A contrast pneumo-mechanic PIVOT operated by a control PLC is installed on the motorized roller conveyor at the inlet to orient the cartons according to the palletizing configuration. 
Motorized transport on board of the machine where the configuration of the layers is performed row by row with the possibility of creating spaces, if necessary, with a step-by-step system. A pusher mounted on a double-column framework and operated through a progressive variable speed inverter, transfers the pre-formed rows on an intermediate plane and only after completing the formation transfers it on the palletizing head. 
The palletizing head is of central-opening type with sliding of the two half-parts in opposite directions: this technology allows a perfect centring of the products thanks to the balances distribution of the weight on the whole surface of the pallet. The palletizing head is equipped with four mechanical motorized compactors with automatic positioning allowing the squaring of every single layer before and during the laying-down.

Model suitable for lines with capacities up to 3.500 cartons/hour.

STRATOS 20-P3

PACKAGES AND BAGS

Machine suitable for the palletizing in layers o packages with weight from 0.5 kg to 2 kg fed in horizontal position, with simultaneous wrapping of the layers.

Framework with carbon steel column bearing the palletizing head. The mobile elements are manufactured with high precision mechanical parts controlled by servo-motors with progressive variable speed.

The palletizing head lays down the layers in an automatic wrapping machine with pre-stretch and automatic cut of the shrink foil, inserted in the palletizer. 
Every 3 layers laid down the pallet is wrapped to prevent the bags from falling and to guarantee the perfect squaring. 

Possibility of using pallets 800 x 1200 and 800 x 600 mm. 

Possibility of palletizing product in bulk or bundles. 

Models suitable for lines with capacity up to 100 packages/minute.

STRATOS 20-P2

PACKAGES AND BAGS

Machine suitable to the palletizing in layers of bags fed in horizontal position. 

Framework with carbon steel column bearing the palletizing head. 
The mobile parts are manufactured with high precision mechanical parts controlled by servo-motors at progressive variable speed. 
Machine equipped with: 

  • Bag turning unit for different configuration of the layer, 
  • Bag compaction unit for the reduction the thickness of the bag. 

Automatic pneumatic contactor for the compacting and the squaring of every single player before and during the laying down stage. 
Model suitable for lines with production capacity up to 32 bags/minute.